Pick and place equipment

Europlacer Vitesse:

Vitesse² is the ultimate SMT placement solution - high throughput combined
with the flexibility of a mid-range fine pitch placer. Unlike conventional chip
shooters, the Vitesse² is able to place a wide range of devices; ranging from
0201s to 50mm² QFP (70mm² QFP and 100mm connector optional), at a
placement rate of 25000 cph. Such flexibility is achieved through Europlacer's
intelligent feeder and vision technologies. Equipped with 'smart' nozzles
and 'on the fly' vision, the Vitesse² fulfils all possible placement needs in
one compact system.

• 0.144 sec tact time (25000 cph equivalent)
• 198 * 8mm capacity
• Intelligent feeders
• 'On the fly' vision
• 0201s to 50mm2 QFP
• 'Smart' nozzles

Click here for detailed machine spec

Click here to view a video clip 2.9Mb

Three Siemens MS90Vs:
• Placement rate 4000 components per hour.
• Absolute placement accuracy ± 0.08 mm with axis repeatability of ± 0.02 mm.
• Component verification - CRDL measurement.
• Maximum panel size 270 mm x 320 mm.
• Feeder capacity 90x8 mm tape feeders.
• Component size 0603 to 32 mm x 32 mm with vision system (PLCC 84/QFP208).
• Fiducial recognition of Pcbs. 
• Component recognition camera.
• Adhesive placement capability.

Siemens MS128:
• Placement rate 4200 components per hour.
• Maximum panel size 460 mm x 460 mm.                        
• Feeder capacity, 128x8 mm tape feeders.
• Absolute placement accuracy ± 0.08 mm with axis repeatability of ± 0.02 mm.
• Adhesive placement capability.
• Component verification - CRDL measurement.
• Component size 0402 to 50 mm x 50mm with vision system.
• Fiducial recognition of Pcbs.
• Component recognition camera.
 
 

Reflow Soldering Equipment

Quad 941 Convection Oven:
• 8 Active Heater Chambers
• 1 Active Cooling
• Maximum panel width 450mm. 
• Microprocessor control for total repeatability.

Surf Systems IR400:
• Four heating zones.
• One cooling zone.
• Maximum panel width 400mm. 
• Microprocessor control for total repeatability.

Hellar Oven (Convection)
• 8 Zone Heating Zones
• One cooling Zone

Click here to view a video clip 0.9Mb
 

SMT Rework Equipment

Pace Europe MBT Rework station

JBC Hot air station
 

Processes

• Camtronics Vale offers no-clean and aqueous-cleaned processes
   to suit individual customer requirements.